Leggari Products Epoxy Brochure

PREPPING THE SUBSTRATE OR SURFACE

One of the best ways to prep your surface is diamond grinding. You can rent concrete grinders at most rental stores. The next best way is using an etching chemical to etch the surface of the concrete. You can also sand the surface if the before mentioned methods can’t be done. If you can only prep minimally or can’t prep at all we have a Prep Replacement Primer to help achieve a strong bond. We always recommend prepping the concrete surface first.

PRIMING THE SUBSTRATE OR SURFACE

PRIMER COAT

Priming the floor is simple and fast. Mix your pre-measured primer then dip and roll the pigmented primer across the surface until the floor is completely pigmented. Wait 1 hr (or until tacky and not coming off to the touch) and start applying the Base Coat.

METALLIC EPOXY COAT

Applying the Base Coat and Highlights is the funnest part. Mix your pre-measured Base Coat, pour it out across the floor and begin to spread out the epoxy with your rubber squeegee getting it as even as you can. Our Epoxy self-levels so don’t worry about getting it perfectly even. Quickly roll over the surface with your paint roller to help even out the epoxy. Now mix your pre-measured highlight color and apply it to the base color, then blend it to your desired look.

METALLIC EPOXY COAT

HIGH WEAR TOP COAT

We offer 2 different gloss sheens in our Urethane Top Coat. The Top Coat comes with the option to have a High Gloss or Satin Finish. It needs to be rolled out super thin and leaves a minor texture which gives it the extra durability. Apply it within 24 hrs of installing your floor kit or you will need to sand the surface before applying it. **APPLICATION DETAILS ARE ADDRESSED IN OUR TUTORIAL VIDEOS.

URETHANE TOP COAT

Powered by